Zenit 12xp flash lamp and interchangeable lenses

Taking pictures with Zenit 12xp flash lamp. The shutter of the Zenit 12xp camera is synchronized with the operation of electronic pulse flashlamps (X-sync). To connect with an electronic flash of the camera has a plug socket 3, located on the front of the camera. The camera design also provides cable-free connection with flash-lamp, designed for such a connection.

To this end, the camera has a clip 5. Before installing the flash lamp on the camera to the holder of 5 Pull the protective pad 16. For shooting with the flash lamp to set the shutter 1 / 30 sec. Aperture is determined in accordance with the instructions available in the operating manual for the flash lamp.

Working with Zenit 12xp interchangeable lenses and shooting at close range

Lenses with an index of "MC" are multi-coated optical surfaces, which provides a higher degree of removal of the (halos, glare and light spots) when shooting against the light with a large drop in brightness of the object and improves color reproduction.
In the absence of an interchangeable lens mechanism jumping diaphragm aperture control is carried out manually. When working with long lenses possible slight clipping of the left and right edges of the frame. Using a special camera setup can be used for making copies of drawings, manuscripts, photographs. Reproduction, use of extension tubes which are installed between the camera body and lens. To obtain the desired magnification one or more rings. Extension rings, with the pusher, use with lenses that do not switch to manual aperture setting (eg, Helios-44M-4 ").

Rings without pushers use with lenses in which the aperture is set manually (diaphragm mode selector switch set to "M").